| MOUNTED PATROL SUPPLY, LLC 866-469-6007 Sharon E. Illge owner |
| MOUNTED POLICE HELMETS |
Shell: The lightweight shell is constructed from multiple layers of fiberglass and kevlar compressed
using high pressure thermo molding methods to form a strong yet light helmet. The multiple layer
construction of alternating panels and straps of fiberglass with a reinforcing patch of coweave kevlar,
bonded with a combination of Polyester and hybrid vinyl ester resins to form a strong shell of
approximately 600 grams that meets or exceeds all applicable requirements.
The shell has (4) four ventilation vents to accommodate air flow. The durable finish has a steel core
and neoprene rubber exterior.
Liner: The liner is made of expanded polystyrene specialty bead that has been designed to meet the
standards for helmet safety and provide maximum impact energy attentuation.
Suspension System: The suspension system utilizes a moisture wicking tricot fabric for the ultimate
in moisture management and air flow.
Sizing System: This model has (2) two sizes utilizing a 1/8 increment sizing system that
accommodates hat sizes from 6 1/2 to 7 3/4. It features a washable- removable custom fit pad liner
system.
using high pressure thermo molding methods to form a strong yet light helmet. The multiple layer
construction of alternating panels and straps of fiberglass with a reinforcing patch of coweave kevlar,
bonded with a combination of Polyester and hybrid vinyl ester resins to form a strong shell of
approximately 600 grams that meets or exceeds all applicable requirements.
The shell has (4) four ventilation vents to accommodate air flow. The durable finish has a steel core
and neoprene rubber exterior.
Liner: The liner is made of expanded polystyrene specialty bead that has been designed to meet the
standards for helmet safety and provide maximum impact energy attentuation.
Suspension System: The suspension system utilizes a moisture wicking tricot fabric for the ultimate
in moisture management and air flow.
Sizing System: This model has (2) two sizes utilizing a 1/8 increment sizing system that
accommodates hat sizes from 6 1/2 to 7 3/4. It features a washable- removable custom fit pad liner
system.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Measuring the head to determine the correct helmet size
Measuring the head is the starting point for determining the correct
helmet size. Use cloth measuring tape.
Determining your correct helmet begins with measuring the
circumference of your head. This measurement should be taken at a
point approximately one inch above the eyebrow in the front and at a
point on the back of the head that results in the largest possible
measurement. Several measurements should be taken to be sure that
the largest one has been obtained.
Measuring the head is the starting point for determining the correct
helmet size. Use cloth measuring tape.
Determining your correct helmet begins with measuring the
circumference of your head. This measurement should be taken at a
point approximately one inch above the eyebrow in the front and at a
point on the back of the head that results in the largest possible
measurement. Several measurements should be taken to be sure that
the largest one has been obtained.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
To see all products available click our product catalog